FAQ: How To Sharpen Ice Skates?

Can I sharpen ice skates at home?

Speed- and tour skates have a flat glide surface and can reliably be sharpened at home with fairly basic equipment. A long stone, and a fixture to hold the blades perpendicular will work fine.

Do you need to sharpen ice skates?

The rule of thumb is to sharpen ice skates after every 15-20 hours of use. The weight of the skater also plays a role in how often you need to sharpen ice skates. Heavier people put more pressure on the blade than lighter people, which digs their blade deeper into the ice, giving it more bite.

What happens if you don’t Sharpen your ice skates?

When Skates are Not Sharp The edges on the blade will ’round’ away from the hollow due to the weight your body places on them, and due to the friction that is generate with the ice. This ’rounded’ results int he skates not being able to bite into the ice as well as they could when they were first sharpened.

How can I sharpen my skates without a machine?

Use your flat file and begin at the toe or heel and move it across the blade in a diagonal motion. The file should always remain perpendicular to the blade when sharpening. Run the flat file across a blade in one direction 15 to 20 times and then repeat in the opposite direction. Do the same for the other skate.

Can you skate with unsharpened skates?

No one should ever skate on dull or unsharpened blades. Your skating edge will help you turn and maneuver, as well as keep your balance. The second is that people with weak ankles cannot skate. Keep them sharp — but not too sharp: A sharp blade grabs the ice better than a dull one.

How do I know if my skates need sharpening?

Basically, get them sharpened when they feel too dull for you, or you lose an edge on one side of the skate or you have nicks in the blade. As a rule of thumb, an average hockeyplayer will lose somewhere between 5 and 10 % of the skates edge per hour of skating.

Are brand new skates sharpened?

New hockey skates do not come sharpened. The bottoms of blades on new skates are flatter and rounded, so they need a hollow groove cut into them before they should be used. A trained sharpener with proper equipment will give the blades on new skates the edges needed to perform effectively on the ice.

What should I sharpen my skates at?

You can get your skates sharpened anywhere from 1/8th of an inch to one inch. 1/8th would be the sharpest, and one inch would be the least sharp. The majority of pros use something with a shallower hollow, but preference does widely vary.

How do you know when you need new skates?

Hockey skates should firmly cradle your feet and provide support up through the ankles, similar to ski boots. If your skates don’t support your foot and ankle, it’s time for a new pair. Also, check the steel blades on your hockey skates. If they’re pitted, rusted, or worn, they might need sharpening—or replacing.

Is it hard to sharpen skates?

Not fully sharpened: Skates will have very little bite in every direction, making it tough to push, turn, stop, or do much of anything. This is because the blade was flattened from the cross-grind wheel, but the sharpener didn’t pass it over the finishing wheel enough times for it to regain its edge.

How often do hockey players sharpen their skates?

A rule of thumb is for every 15 to 20 hours of ice time, but let’s go beyond the basics. The biggest factor is how often you skate, hence the rule of thumb based on ice time. It’s not unheard of for some players to sharpen their blades before every game, and others once or twice a year.